1. LMO58: How many adapters can be paired together?
Two, the product is a Bluetooth cable replacement product, so one adapter at each end is required.
2. LM058: How do you power this serial port plug?
There are two ways to do it either through DB-9 connector on pin 9 or through the mini USB connector in the right side of the serial port plug.
3. How do I qualify and list my Bluetooth® product based on Free2move Bluetooth® modules?
You will have to become an adopter member (free of charge) at
www.bluetooth.org and list your product based on our end qualified
Bluetooth® modules.Bluetooth® modules FAQ
4. Will my Bluetooth® enabled device work with Free2move Bluetooth® modules?
Yes, if both ends share the same Bluetooth® profile.
5. What is a Bluetooth® profile?
Quote from the Bluetooth® SIG;
“Bluetooth® profiles are general behaviors through which Bluetooth®
enabled devices communicate with other devices. Bluetooth® technology
defines a wide range of profiles that describe many different types of
use cases. By following a guidance provided in Bluetooth®
specifications, developers can create applications to work with other
devices also conforming to the Bluetooth® specification.”
Learn more about Bluetooth® at www.bluetooth.org
6. F2M01SXA / Uncord: How can I configure the Uncord™ Serial Port Plug from a microcontroller?
Please read the Wireless UART user manual for a list of all configuration commands.
7. F2M01SXA / Uncord: My Bluetooth® device require a passkey
The Uncord™ is by default configured with no passkey. Reconfigure the Uncord™ with a proper passkey.
8. F2M01SXA / Uncord: No data is transmitted over the BLuetooth® link
Uncord™ is intended to be attached to a DTE-device (e.g. a
computer). Please use a proper pin-converter if connecting the Uncord™
to a DCE-device or other RS-232 connector.
Ensure that the Uncord™ is properly configured (baud rate, Stop
bits, Parity). Configure the Uncord™ to match the device it is attached
to.
Make sure that you have a proper Bluetooth® connection between the F2M01C1 and the other Bluetooth® device.
9. F2M01SXA / Uncord: I cannot find the Uncord™ with my Bluetooth® device
Make sure that the Uncord™ is properly powered (5VDC and min. 200mA, check polarity)Make sure that the your Bluetooth® device support SPP (Serial Port Profile)The Uncord™ must be in discoverable mode (Bluetooth® slave)
